The external power supply prolongs device’s operation time.
Video output allows to conduct video recording to external devices without the use of additional adapters and camera or camcorders.
Protected against water sprinkling
Magnification: 2.1x / 4.2x
Refresh rate: 30 Hz
Range of detection: 950 m
Operating temperature: -25 ... +50 °С
Calibration modes: silent (manual),
Thermal imaging scope Quantum HD38S | Carrying case | User manual | Video cable | Hand strap | Automotive cigarette lighter adapter | Spare battery container | Cleaning cloth | Warranty cardWhere to buy
The Quantum suggests three calibration modes: silent manual mode (“M”), automatic (“A”) and semiautomatic (“H”). The “A” mode implies calibration without user participation (process initiation (actuation of the shutter) takes place automatically). In the “H” mode the user decides on his own if calibration is required based on the image quality. Button “Cal” is pressed in this mode. Manual calibration (“M”) is carried out by pressing the button when the lens cap is closed. The “M” mode is recommended for hunting due to silent operation.
The Quantum suggests three operating modes, each designed to deliver best possible image in specific viewing conditions. The modes are as follows: “City” (enhanced contrast), “Forest” (low contrast) and “Identification” (improved rendering of hot objects’ details).
The 50 Hz refresh rate provides a smooth and consistent image of moving objects.
High resolution (384x288) microbolometer ensures detailed image and long detection range.
All Quantum models can satisfy the wish of any viewer. The exact model you need can be found in a wide variety of Quantum series
The body of fiberglass reinforced plastic is able to effectively withstand impact, moisture and dust which allows the units to be used in extreme conditions. The rubber armouring ensures secure grip of the unit.
Quantum imaging scopes are effective for the use in low temperatures (-25°C) thanks to the frost-resistant OLED display employed in the unit (image remains the same as when viewing at positive environment temperature).
The control wheel located next to the lens allows the user to setup brightness and contrast most appropriate for specific situation.
The Quantum is powered with four AA size (rechargeable) batteries. The batteries are stored in a container which is then placed in a battery compartment of the unit.
All Quantum models are equipped with an analog video output to enable connection of external recording equipment or transmitting image to the display.
Operation time of the unit can be significantly increased thanks to the use of external power supplies (for example, Pulsar EPS3/EPS5) that can be connected with a special jack. When used in frosty weather, the power supply can be stored under the clothes.
|Frame Rate, Hz||30|
|Microbolometer resolution, pixels||384x288|
|Display Resolution, pix.||640x480|
|Digital zoom, x||2|
|Field of View,°, horizontal * vertical||14.4x10.8|
|Diopter adjustment, dptr.||± 5|
|Range of detection, m (object high*width = 1,7*0,5m)||950|
|Power Supply, V||4 ÷ 6|
|Battery Life, hour||5.5|
|External Power Supply||DC 8.4 ÷ 15|
|Operating Temperature,°С||- 25 … +50|
|Level of Protection (acc. to IEC 60529)||IPX4|
|Weight (without batteries), kg||0.35|
|Modification||Frame Rate, Hz||Magnification, х||Range of detection, m (object high*width = 1,7*0,5m)||Weight (without batteries), kg|
|Quantum XQ50 Thermal Scope||50||4.1 ... 16.4||1800||0.43|
|Quantum XD50S Thermal Scope||50||2.8||1250||0.43|
|Quantum XQ38 Thermal Scope||50||3.1 ... 12.4||1350||0.35|
|Quantum XD38S Thermal Scope||50||2.1||950||0.35|
|Quantum XQ19 Thermal Scope||50||1.6 ... 6.4||680||0.32|
|Quantum XD19S Thermal Scope||50||1.1||500||0.32|
|Quantum HD50S Thermal Scope||30||2.8||1250||0.43|
|Quantum LD50S Thermal Scope||9||2.8||1250||0.43|
|Quantum LD38S Thermal Scope||9||2.1||950||0.35|
|Quantum HD19S Thermal Scope||30||1.1||500||0.32|
|Quantum LD19S Thermal Scope||9||1.1||500||0.32|
Mike Powell finally takes the thermal imaging plunge with the Pulsar Quantum. But is it worth the expense?MORE INFO
The Pulsar neck strap is designed to be fixed to the devices which are equipped with ¼ inch tripod socket. It can be used with thermal imagers Quantum/ Quantum S and night vision devices Challenger and others.
Recording resolution: 640х480 pix
Type of memory card: SD