Protected against water sprinkling
Video output allows to conduct video recording to external devices without the use of additional adapters and camera or camcorders.
The external power supply prolongs device’s operation time.
Magnification: 2.8x ...11.2x Refresh rate: 50 Hz Range of detection: 1250 m Field of view, HxV: 11x8.3° Operating temperature: -25 ... +50 °С Stadiametric rangefinder 7 Color paletts
Thermal imaging scope Quantum XD50S | Carrying case | User manual | Video cable | Hand strap | Automotive cigarette lighter adapter | Spare battery container | Cleaning cloth | Warranty cardWhere to buy
Quantum offers a choice of 7
Due to the high image frequency (50 Hz) it is comfortable to use thermal camera dynamically (during rapid moving of observer or object of observation).
The Quantum suggests three operating modes, each designed to deliver best possible image in specific viewing conditions. The modes are as follows: “City” (enhanced contrast), “Forest” (low contrast) and “Identification” (improved rendering of hot objects’ details).
Actual range of detection of a human figure (1.8x0.5m) in the field (human has outerwear, in the field against the background of the forest) for the Quantum models varies from 500 to 1250 m, depending on the model.
When it is necessary to temporarily stop observation the user can apply DISPLAY OFF function. It provides the necessary level of camouflage (no light from the eyepiece of the device) between observation sessions as well as the fast restart of observation (when display is turned off, all other systems are working; for normal operation it is enough just to power on the display again).
Disabling the video output module in the Quantum thermal scopes increases self-contained operating time on a set of batteries or external power supply.
The Quantum suggests three calibration modes: silent manual mode (“M”), automatic (“A”) and semiautomatic (“H”). The “A” mode implies calibration without user participation (process initiation (actuation of the shutter) takes place automatically). In the “H” mode the user decides on his own if calibration is required based on the image quality. Button “Cal” is pressed in this mode. Manual calibration (“M”) is carried out by pressing the button when the lens cap is closed. The “M” mode is recommended for hunting due to silent operation.
The body of fiberglass reinforced plastic is able to effectively withstand impact, moisture and dust which allows the units to be used in extreme conditions. The rubber armouring ensures secure grip of the unit.
The control wheel located next to the lens allows the user to setup brightness and contrast most appropriate for specific situation.
The Quantum is powered with four AA size (rechargeable) batteries. The batteries are stored in a container which is then placed in a battery compartment of the unit.
Operation time of the unit can be significantly increased thanks to the use of external power supplies (for example, Pulsar EPS3/EPS5) that can be connected with a special jack. When used in frosty weather, the power supply can be stored under the clothes.
Actual information about the status of the thermal imaging device, depicted in the form of blue icons and numbers, is located on the data panel in the lower portion of the screen, and does not interfere with the image observed. When switching between various functions (digital zoom, colour inversion, brightness/contrast settings), the respective large sized icon appears in the right upper portion of the screen
Main control functions (turning on and off the unit, sensor calibration, colour inversion/digital zoom) are carried out with the buttons on the upper panel. The size and location of the buttons are customised for comfortable use both with a gloved or bare hand. Brightness and contrast are set up with the controller wheel located next to the objective lens.
|Frame Rate, Hz||50|
|Microbolometer resolution, pixels||384x288|
|Digital zoom, x||2x; 4x|
|Field of View,°, horizontal * vertical||11x8.3|
|Diopter adjustment, dptr.||± 5|
|Range of detection, m (object high*width = 1,7*0,5m)||1250|
|Power Supply, V||4 ÷ 6|
|External Power Supply||DC 8.4 ÷ 15|
|Operating Temperature,°С||- 25 … +50|
|Level of Protection (acc. to IEC 60529)||IPX4|
|Weight (without batteries), kg||0.43|
|Modification||Magnification, х||Field of View,°, horizontal * vertical||Range of detection, m (object high*width = 1,7*0,5m)||Weight (without batteries), kg|
|Quantum XD19S Thermal Scope||1.1||26.8x20.8||500||0.32|
|Quantum XD38S Thermal Scope||2.1||14.4x10.8||950||0.35|
Digital night vision devices and thermal cameras have an important peculiarity which distinguishes them from NV devices based on image intensifier tubes. Their quality and capabilities are characterized not only by form factor and type of materials and parts. Advanced electronic components are the body of the device whereas the soul into the set of expensive machinery is inhaled by software.MORE INFO
Getting acquainted with thermal scope Quantum HD19SMORE INFO
The Pulsar neck strap is designed to be fixed to the devices which are equipped with ¼ inch tripod socket. It can be used with thermal imagers Quantum/ Quantum S and night vision devices Challenger and others.
Recording resolution: 640х480 pix
Type of memory card: SD
External power supplies are designed for the use with digital units and NV riflescopes, thermal imaging scopes.