HOW TO (Stream Vision)

Please download the App from Google Play or the App Store.

Stream Vision is compatible with Android 4.4. and higher; iOS 12 and higher.

Windows OS is not supported.

No, Stream Vision is designed only for mobile devices.

• Activate WiFi on your Pulsar device. A WiFi icon in the status bar will start to blink, then a question mark will appear next to it.
• Activate WiFi in the settings of your smartphone. Please ignore "weak signal" and "no internet connection" messages (if any).
• Please make sure the password in the Pulsar device and the one you enter match.
• Select the network with your Pulsar device's name (contains device name and 4 last digits of its serial number) in your phone. Click "Connect".
• A WiFi icon with a phone symbol should appear in the status bar of your Pulsar device. This means your phone is connected.
• Launch Stream Vision on your phone. All icons in the main menu (including the viewfinder) should be active.

• Download the Stream Vision App on Google Play or App Store free of charge.
• Connect your Pulsar device to your mobile device (smartphone or tablet). Please refer to point 3 above.
• Launch Stream Vision and go to the section “My Devices”.
• Select your Pulsar device and press “Check For Update”. 

Important:

- if your Pulsar device is connected to your phone, please turn on “Mobile data transfer” (GPRS/3G/4G/5G) to check and to download update;

- if your Pulsar device is not connected to your phone but it’s already in the “My Devices” section, you can use Wi-Fi to download the update.

• Wait for the update to download and install. Pulsar device will reboot and will be ready to operate.

Video instructions are available here.

Please make sure:

• you have the latest Stream Vision version available on Google Play / App Store.
• your mobile connection is stable during download. Disconnect the phone from the Pulsar device while downloading firmware.

Please use the link to check the latest firmware update for your device.

Alternatively, please proceed to the "My devices" section in Stream Vision, select your product and

click on "Check for updates".

Stream Vision only works in the horizontal (landscape) format.

Please go to "Wi-Fi Settings" => "Access level setup" menu item of your device to switch from "Guest" mode to "Owner" mode.

No, it’s only possible to connect to one mobile device at a time.

No. Stream Vision is compatible only with products under Pulsar and Yukon brands. 

Yes. However, please note that if your phone does not support Google Play and Google services,

stable operation of Stream Vision is not guaranteed.

Non-compatible models are Huawei P40 / P40 Pro, Mate 40, Mate 30, Mate Xs, Honor 30 etc.с

To cancel the current app (SMM or email) as a default sharing location, please go to the settings of your phone (Applications), select "Facebook" and deselect "Use as default".
Please note that the mentioned names of the phone's menu items may look and sound different.

No, connection to PC is intended to transfer recorded files to PC and to charge your Pulsar device. To stream video from your Pulsar device, please download Stream Vision application.