Calibration Mode

Selection of calibration mode. 

There are three calibration modes: Manual (M), Semi-Automatic (SA) and Automatic (A).

To select the calibration mode:

1. Press and hold the M (9) button to enter the main menu.
2. Use the UP (10) / DOWN (8) buttons to select the Calibration Mode option.
3. Press the М (9) button briefly to enter the submenu.
4. Use the UP (10) / DOWN (8) buttons to select one of the calibration modes.
5. Press the M (9) button briefly to confirm the selection.

More details in the section Microbolometer Calibration.