en
de

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Thermion 2 LRF XG
Manual
Thermion 2 LRF XG

Table of contents
Rangefinder

Rangefinder

Menu item Rangefinder allows you to set up built-in rangefinder’s parameters as follows:

  1. Enter the main menu with a long press of the controller button (6).
  2. Rotate the controller ring (6) to select the submenu Rangefinder  .
  3. Enter the submenu with a short press of the controller button (6).
  4. Rotate the controller ring (6) to select the desired menu item.

Reticle Type

  1. Rotate the controller ring (6) to select the Reticle Type  menu item.
  2. Press briefly the controller button (6) to enter submenu.
  3. Rotate the controller ring (6) to select one of the three reticle shapes .
  4. Confirm selection with a brief press of the controller button (6).
  5. The selected reticle will appear on the display.
  6. The reticle will disappear from the display if the rangefinder is not used longer than 4 seconds.

TPA

Function "TPA" (Target Position Angle) allows you to measure the angle of target location (angle of elevation). When the function is activated, the angle is shown continuously.

  1. Rotate the controller ring (6) to select TPA .
  2. Turn TPA on/off with a short press of the controller button (6).

THD

"THD" (True Horizontal Distance) function allows you to measure true horizontal distance to a target based on the angle of elevation value.

  1. Rotate the controller ring (6) to select THD .
  2. Turn THD on/off with a short press of the controller button (6).
  3. Hereinafter the message THD will appear above the distance readings.

Auxiliary Indication of Distance

The "Auxiliary indication of distance" function shows an additional window with the result of measuring the distance near the reticles of the rangefinder or ballistic calculator.

  1. Rotate the controller ring (6) to select Auxiliary indication of distance .
  2. Press briefly the controller button (6) to enter submenu.
  3. Rotate the controller ring (6) to select the display mode: Off, Bound to reticle mark or Bound to SPOA mark.
  4. Confirm selection with a brief press of the controller button (6).

Ballistic Calculator

The Ballistic calculator function shows the recommended aiming point and correction values. For more information on using the function, see the section Ballistic Calculator.

  1. Rotate the controller ring (6) to select Ballistic Calculator .
  2. Turn the Ballistic Calculator on/off with a short press of the controller button (6).

Ballistic Calculator Units

In this item, you can change or disable the units for the ballistic calculator corrections.

  1. Rotate the controller ring (6) to select the Ballistic Calculator Units  menu item.
  2. Briefly press the controller button (6) to enter the submenu.
  3. Rotate the controller ring (6) to select one of the three units (MOA, mil, Click) or Off to disable the units.
  4. Confirm your selection with a brief press of the controller button (6).

SPOA Mark

  1. Rotate the controller ring (6) to select the SPOA mark  menu item.
  2. Press briefly the controller button (6) to enter submenu.
  3. Rotate the controller ring (6) to select one of the three reticle shapes for the suggested point of aiming .
  4. Confirm selection with a brief press of the controller button (6).
  5. The selected reticle will appear on the display when using the Ballistic Calculator.

Notes:

  • MilLine  is a line with 1 mil grooves. It scales as the magnification changes. It is designed for shooting with aiming off for adjustment depending on wind direction: the entire line moves vertically. As for the horizontal direction, you can navigate by grooves. If the weather correction function is turned on, the cross on the line will also move to the side.
  • SPOA colour varies depending on the palette. For the first two SPOA: red colour on black and white palettes, blue - on colour palettes. For the third SPOA : the line colour is the same as the reticle colour, the central cross is red on black and white palettes, blue - on colour palettes.​