en
de

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Thermion 2 LRF XP50 Pro
Manual
Thermion 2 LRF XP50 Pro

Table of contents

Wi-Fi Function

The riflescope has a function for wireless communication with mobile devices (smartphone or tablet) via Wi-Fi.

  1. To enable the wireless module, enter the main menu by long pressing the controller button (6).
  2. Rotate the controller ring (6) to select the Wi-Fi Activation  menu item.
  3. Press the controller button (6) briefly to turn on/off the Wi-Fi module.

Wi-Fi is displayed in the status bar as follows:

Indication in the Status Bar

Connection Status

Wi-Fi is switched off

Wi-Fi is switched on by the user, Wi-Fi connection in the riflescope is in progress.

Wi-Fi is switched on, there is no connection to the riflescope

Wi-Fi is switched on, there is connection to the riflescope

  • An external device recognizes the riflescope under the name Thermion2_XXXX, where XXXX are the four last digits of the serial number.
  • After entering the password (default: 12345678) on a mobile (see Password Setup subsection of the Wi-Fi Settings section for more information on setting a password) and setting up a connection, the icon in the riflescope status bar will change to .
  • Launch Stream Vision 2 application on your mobile device (see Stream Vision 2 section).
  • Video broadcasting on a mobile screen starts after the viewfinder button on the mobile screen is activated.
  • The Wi-Fi function will turn off automatically if there is not enough battery power for Wi-Fi. The battery icons will turn red and flash. To use the Wi-Fi function again, you need to charge the batteries.