The status bar at the bottom of the display shows current operating statuses via icons, including:
1. Colour Mode (shown only in thermal imaging mode and Multispectral PiP Thermal):
- White hot
- Black hot
2. Actual zeroing profile (e.g., A)
3. Zeroing distance (e.g., 100 m)
4. Image mode:
Digital mode
Thermal imaging mode
Multispectral PiP Digital
Multispectral PiP Thermal
Multispectral PiP Digital disabled
Multispectral PiP Thermal disabled
The image channel can be disabled with "Observation Channel" in the General Settings section.
5. Amplification level (e.g., Normal; displayed only in thermal imaging mode and Multispectral PiP Thermal)
6. Smoothing Filter (displayed when the function is on; displayed only in thermal imaging mode and Multispectral PiP Thermal)
7. Calibration mode (a countdown timer will appear instead of the calibration icon when in automatic calibration mode with 3 seconds remaining until automatic calibration; displayed only in thermal imaging mode and Multispectral PiP Thermal)
8. Microphone
9. Current magnification
10. Wi-Fi connection
11. Auto Shutdown function (e.g., 5 min.)
12. Clock
13. Power supply: