Thermion thermal imaging riflescopes come with a built-in rechargeable lithium-ion Battery Pack APS3 and a removable rechargeable lithium-ion APS2 Battery Pack. The batteries should be charged before first use.
Attention! When charging batteries via the microUSB connector (10) in the body casing of the riflescope, the built-in Battery Pack is the first to be charged. Once it is fully charged, the removable Battery Pack begins charging. When the device is in use, power consumption occurs in reverse order.
The rechargeable lithium-ion APS2 Battery Pack can be recharged using the APS charger*.
The LED indicator (15) will display battery charge status:
LED Indicator*** |
Battery Charge Status |
Battery level is from 0% to 10%. Charger is not connected to a power supply. |
|
Battery level is from 0% to 10%. Charger is connected to a power supply. |
|
Defective battery. Do not use the battery! |
|
Battery level is from 10% to 20%. |
|
Battery level is from 20% to 60%. |
|
Battery level is from 60% to 95%. |
|
Battery completely charged. Charging will automatically stop. The battery can be disconnected from the charger. |
* Included in the delivery package.
** APS3 Battery Pack is available (sold separately).
*** LED indicator displays the current battery charge status for 30 seconds when the APS charger is not plugged in. When the power is being supplied, the indicator is constantly displaying the current battery charge status, the LEDs are additionally flickering to display the battery charging process.