en
fr

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Ultra S IR illuminator
Manual
Ultra S IR illuminator

Table of contents

Removing the IR Illuminator

  1. To remove the Pulsar Ultra-X850S/-X940S illuminator, lift up or lower down the lever (3) (depending on the type of the device). Gently pull the illuminator away from the device.
  2. Mount the connector plug (6) of the IR illuminator on the digital device.
  3. Mount the cover (1) on the IR illuminator. To do this, insert the cover and lock it by lifting up the lever (3).
  4. The status bar will show an icon of the disconnected IR Illuminator ().