en
de fr es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Digex
Manual
Digex

Table of contents

Installing the IR Illuminator on Riflescope

  1. Open the mount ring of the IR illuminator (24).
  2. Put the mount on the riflescope body so that the mount half rings encircle the riflescope body.
  3. Raising the eccentric lever (26), move it to the left. Align the eccentric axis with the groove of the moving half ring. The eccentric lever (26) shall take its seat.
  4. Lock the eccentric lever (26) position by lowering it down.
  5. The IR illuminator mount should be as close as possible to body of the riflescope lens.
  6. Tighten the screw in the eccentric pin (25) using an Allen wrench.
  7. If the lever loosens during operation, tighten the screw with an Allen key.