Technical Maintenance and Storage

Maintenance should be carried out at least twice a year and include the following steps:

• Wipe the exterior metal and plastic surfaces with a cotton cloth to remove dust and dirt. To avoid damage to the paint coating, do not use chemically active substances, solvents, etc.
• Clean the electrical contacts of the rechargeable battery on the device using a non-greasy organic solvent.
• Check the eyepiece and the lens and if required remove dust and dirt from the optics (preferably using a non-contact method). Cleaning of the exterior surfaces of the optics should only be done with products specifically designed for this purpose.
• Always store the device in its carrying case in a dry, well-ventilated space. For prolonged storage, remove the batteries.