en

Deutschland

Italia

España

United Kingdom

United States

中国

Lietuva

Trail 2 LRF
Manual
Trail 2 LRF

Table of contents

Mode

The device has four operating modes of the thermal imager: Forest (observation mode of objects within low thermal contrast conditions), Rocks (observation mode of objects within high thermal contrast conditions), Identification (high detalization mode), User (individual brightness and contrast settings).

  1. Enter the main menu with a long press of М (4) button.
  2. Press UP (3)/DOWN (5) buttons to select Mode  menu item.
  3. Enter the Mode submenu with a short press of M (4) button.
  4. Select one of the settings described below with UP (3)/DOWN (5) buttons.
  5. A short press of the M (4) button confirms the selection.

Forest

This is the best mode when searching and observing within field conditions, against the background of leaves, bushes and grass. The mode is highly informative about an object being observed as well as landscape details.

Rocks

This is the best mode when observing objects after a sunny day or within urban conditions.

I dentification

This is the best mode when observing objects within adverse weather conditions (fog, mist, rain and snow). It allows you to recognize the characteristics of an object being observed more clearly. Zoom increase may be accompanied by insignificant image graininess.

User

It allows you to configure and save custom brightness and contrast settings, as well as one of the three modes (Forest, Rocks, Identification) as basic.