Axion 2 XQ / Axion 2 XQ LRF

Axion 2 XQ35 has the following advantages:

• new image processing algorithms;
• adjusted brightness and contrast settings combined with three image amplification levels which allow early detection and recognition of objects in harsh weather and minor temperature differences;
• a distinctively wide linear field of view of 10.7° / 18.2 m at 100 m for improved observation of wide areas and distant objects in motion;
• a fast aperture F35/1.0 lens,
• up to 11 hours of continuous operation on a single battery charge;
• compatible with Stream Vision 2 which allows distant operation and firmware update from smartphone;
• 10% more compact and 16% more lightweight than Axion XQ38).

Image Boost is not available as a dedicated feature but it’s incorporated in the image amplification levels.

To switch between color modes, please proceed to the menu and select the menu item "Color modes". Please refer to the user manual for details.

1) Download the Stream Vision 2 App from Google Play or the App Store free of charge.

2) Connect your Pulsar device to your mobile device (refer to point 8 above).

3) Launch Stream Vision 2 and go to “Settings”.

4) Select your connected Pulsar device and press “Check for updates”.

Important:

If your Pulsar device is connected to your phone, please use Mobile data (GPRS / 3G / 4G / 5G) to download the update.

- If your Pulsar device is not connected to your phone but is already in the “Device” menu section, you can use WiFi to download updates.

5) Download the firmware update to the application, connect your device unless it´s connected.

6) Press “Update device” and wait for the update to download and install.

Then the Pulsar device will restart and be ready to operate.

No, restoring a previous firmware version is not possible.

AXION 是完全手持装置，无法安装在步枪上。 

在校准过程中，图像在屏幕上冻结，这是正常现象而非缺陷。默认校准模式为“自动”（Automatic）（软件决定何时需要校准），但您可以在“主菜单”（Main menu）=>“校准模式”（Calibration mode）中将其更改为“手动”（Manua）模式，以便根据实际图像质量来校准步枪瞄准镜。请关闭镜头盖后再进行手动校准。我们建议始终使用自动模式。
请在您的热成像装置的用户手册中阅读有关校准的更多信息。

您在未关闭镜头盖的情况下使用手动校准模式。请确保在校准过程中关闭镜头盖，如果不想关闭镜头盖，请切换到自动校准模式。

不可以，在自动和半自动校准模式下，咔哒声是正常现象。
您可以切换到手动校准模式，以避免发出声音。请记住关闭镜头盖，以确保显示屏上不会出现重影。

校准可均衡微测辐射热计的背景温度并消除图像缺陷
（比如竖直条纹、以前目标的重影等）。校准之间的时间间隔取决于
运行时间：热成像仪不间断运行时间越长，需要校准频率越低。

我的热成像装置的屏幕上存在有缺陷像素（或像素群）。
请注意，传感器允许一定数量的非功能像素（最多占总数量0.5%），不视为缺陷。您可以尝试使用热成像仪的相应菜单项修复像素。详情请参阅用户手册。
点击此处查看视频说明示例。
激活装置菜单中的像素修复选项。您将被重定向到带有画中画（PiP）模式和修复十字（较早类型装置可能不会显示画中画功能）的窗口。使用导航按钮将十字移动到坏像素的坐标中。当修复十字处于正确位置时，死像素消失。按修复按钮（根据装置的用户手册）并检查显示屏上是否显示“确定”（OK）消息。

Please take note of the following:

• Accuracy of measurement and maximum range depend on the reflection ratio of the target surface, the angle at which the emitting beam falls on the target surface and environmental conditions. Reflectivity is also affected by surface texture, color, size and the shape of the target. A shiny or brightly colored surface is normally more reflective than a dark surface.
• Measuring range to a small sized target is more difficult than to a large target. Accuracy of the measurement can also be affected by light conditions, fog, haze, rain, snow etc. Ranging performance can degrade in bright conditions or when ranging towards the sun.
• When measuring range to a small-sized target located more that 400 meters away, it is recommended that you put your elbow against a solid surface. This is due to possible hand tremors and difficulty hitting the target with the beam at a longer distance.

我们的所有产品（含AXIONXQ LRF）均采用1级安全（IEC60825-1:2014标准）激光，对眼睛无害。尽管如此，还请避免直视测距仪的发射镜头。

No, it’s not possible. Please use AXION 2 XQ35 LRF if you need a laser rangefinder.