Yes, you can use Trail 2 LRF in any weather conditions (fog, rain, mist etc.), night and day.
Please refer to the user manual available online.
Also, you may find useful our zeroing guide on youtube.
The recommended clamping force is up to 2–3 Nm. Please note that applying thread sealant is very important.
Please make sure:
- your riflescope has the latest firmware version. Click here to check.
- you have correctly and firmly installed the riflescope on your rifle.
- you have correctly carried out the zeroing procedure described in the user manual.
Please note that a certain amount of non-functional pixels (max 0.5% of total quantity) is allowed by the sensor producer and is not considered a defect.
You may try repairing the pixels using the respective menu item of your thermal riflescope. Click here to view sample video instructions.
Please make sure you have made the following adjustments:
In the course of the calibration process the image freezes on the screen – this is normal and not a defect.
Default calibration mode is “Automatic” (the software decides when calibration is necessary) but you can change it to
“Manual” mode in the "Main menu" => "Calibration mode" to calibrate the riflescope when you need to based on actual image quality.
Please close the lens cover prior to manual calibration. We recommend using automatic mode all the time.
Please read more about calibration in the user manual for your thermal device.
You are using the manual calibration mode without closing the lens cover. Please make sure the lens cover is closed during calibration or switch to the automatic calibration mode if you do not want to close the cover.
No, a clicking sound is normal in the automatic and semiautomatic calibration modes.
You may switch to the manual calibration mode to avoid the sound. Remember to close the lens cover to make sure no ghost images appear on the display.
Calibration levels the background temperature of the microbolometer and eliminates image flaws (such as vertical stripes, ghost images of previous objects etc.).
Intervals between calibrations depend on operating time: the longer a thermal imager operates nonstop, the less frequently calibration is required.
It is not possible to turn off the reticle in Trail. For observation purposes,
you may choose Reticle "D50i" in the menu which takes the minimum area of the display.
No, this function is not available. Please use the standard video recording function.
Yes, it's the way it should be.
The rangefinding reticle is always in the center of the field of view.
The aiming reticle after zeroing may be slightly off center which is normal and does not influence shooting accuracy.
我们的所有产品（含Trail 2 LRF）均采用1级安全（IEC60825-1:2014标准）激光，对眼睛无害。尽管如此，还请避免直视测距仪的发射镜头。
No, the Trail 2 LRF does not support remote operation.
To control the riflescope remotely, you may use the Stream Vision App available on
Yes, you can use a car adapter featuring 5V / 2A output.
After zeroing the reticle may be slightly off the centre of the field of view which is normal and does not affect accuracy. If the riflescope is installed properly on your rifle, and the mount is well fixed too, you may not need to move the reticle a lot, thus the reticle will stay very close to the centre.
所有 Pulsar 数字和热成像步枪瞄准镜都具有最大 6000 焦耳的抗震性能。
Trail 2 没有专门在 SCAR 步枪上进行过测试，
我们知道许多客户在使用 Trail 2，而且我们没有听到他们提出任何问题。
Thermal devices are export sensitive if exported outside EU.
Also it might be necessary to apply for import license if you are entering the destination country.
Please contact the customs service of the destination country to find out if any restrictions for the import of thermal devices as a personal belonging apply.
from Yukon Group 2023