中文

Deutschland

Italia

España

United Kingdom

United States

中国

Lietuva

Thermion 2 LRF XP50 Pro
说明书
Thermion 2 LRF XP50 Pro

目录

External Power Supply

Power can be supplied from an external source such as a 5V or 9V power bank.

  1. Connect the external power supply to the micro USB Type-C port (10) of the riflescope.
  2. The riflescope switches to external power source, while built-in Battery Pack APS5 and removable Battery Pack APS2 (or APS3*) will gradually recharge.
  3. A rechargeable battery icon  indicating a percentage of the battery life will appear in the status bar.
  4. When you turn off external power source, the riflescope switches over to the removable battery without turning off. When there is no removable battery or low power level the device switches to the built-in battery.

* Available separately


Warning! Charging APS3 / APS3 / internal APS5 batteries at air temperatures below 0° C (32° F) may reduce battery life. When using external power, connect the Power Bank to the device after it has been turned on and working for several minutes.