en
it

Deutschland

Italia

España

United Kingdom

United States

中国

Lietuva

Helion 2 Pro
Manual
Helion 2 Pro

Table of contents

General Settings

  1. Press and hold down the М (9) button to enter the main menu.
  2. Select option General Settings  with the UP (10) / DOWN (8) buttons.
  3. Press briefly the М (9) button to confirm.

The following settings are available:

 

Language

Language selection:

  1. Select option Language  with the UP (10) / DOWN (8) buttons.
  2. Press briefly the M (9) button to confirm.
  3. Select one of the available interface languages with a short press of the UP (10) / DOWN (8) buttons: English, German, Spanish, French, Russian, Italian, Portuguese, Dutch, Danish, Norwegian, Swedish, Polish, Czech, Hungarian.
  4. Save selection and exit the submenu with a long press of the M (9) button.
 

Date

Date setup

  1. Select option Date  with UP (10) / DOWN (8) buttons.
  2. Enter the submenu with a short press of the M (9) button. The date format is displayed as: YYYY/MM/DD (year/month/day).
  3. Select the correct values for the year, month and date with a short press of the UP (10) / DOWN (8) buttons.
  4. Switch between digits with a short press of the M (9) button.
  5. Save the selected date and exit the submenu with a long press of the M (9) button.

Time

Time setup:

  1. Select option Time  with UP (10) / DOWN (8) buttons.
  2. Enter the submenu with a short press of the М (9) button.
  3. Select the desired time format with a short press of the UP (10) / DOWN (8) buttons: 24 or PM/AM.
  4. Switch to hour setup with a short press of the M (9) button.
  5. Select hour value with a short press of the UP (10) / DOWN (8) buttons.
  6. Switch to minute setup with a short press of the M (9) button.
  7. Select minute value with a short press of the UP (10) / DOWN (8) buttons.
  8. Save the selected time and exit the submenu with a long press of the M (9) button.

Units of Measure

Selection of units of measure:

  1. Select option Units of Measure  with UP (10) / DOWN (8) buttons.
  2. Enter the submenu with a short press of the M (9) button.
  3. Select the desired units of measurement with a short press of the UP (10) / DOWN (8) buttons: Meters or Yards.
  4. Save the selection with a short press of the M (9) button.
  5. Menu exit will take place automatically.

Objective Lens

Lens selection is used when replacing objective lenses.

Selection of the lens type is important for the correct display of the optical magnification and adequate operation of the Stadiametric Rangefinder.

  1. Replace the objective lens: to do this, move the latch (12) backwards, turn the lens counter- clockwise all the way and remove the lens.
  2. Install a new lens, move the latch (12) backwards and move clockwise until the latch snaps.
  3. Enter the General Settings  submenu.
  4. Select the Objective Lens submenu with UP (10) / DOWN (8) buttons
  5. Enter the submenu with a short press of the M (9) button.
  6. With a short press of the UP (10) / DOWN (8) buttons select the desired lens: 28; 38 or 50.
  7. Confirm selection with a long press of the M (9) button.

Default Settings

This menu option allows you to return the settings to their defaults.

  1. Select option Default Settings  with UP (10) / DOWN (8) buttons.
  2. Enter the submenu with a short press of the M (9) button.
  3. With a short press of the UP (10) / DOWN (8) buttons select "Yes" to restore default settings or "No" to abort.
  4. Confirm selection with a short press of the М (9) button.
  • If "Yes"is selected the display will show "Return default settings?" and "Yes" and "No" options.
  • Select "Yes" to restore default settings. If "No" is selected the action is aborted and you return to the submenu.

The following settings will be returned to their defaults before being changed by the user:

  • Video Recorder Operating Mode - Video
  • Observation Mode - Forest
  • Calibration Mode - Automatic
  • Language - English
  • Microphone - Off
  • Wi-Fi - Off (default password)
  • Magnification - Off (without digital zoom)
  • PiP - Off
  • Colour Mode - White Hot
  • Units of measurement - Meters

Warning: The date and time settings and default pixel map are not restored. 

Format

This menu option allows you to format the Flash memory card. All files will be deleted.

Formatting should be carried out in case of a memory card error.

Before formatting, make sure you transfer all footage to other media.

  1. Select option Format  with UP (10) / DOWN (8) buttons.
  2. Enter the submenu with a short press of the M (9) button.
  3. With a short press of the UP (10) / DOWN (8) buttons select "Yes" to format the memory card or "No" to return to the submenu.
  4. Confirm selection with a short press of the M (9) button.
  • If "Yes" is selected, display will show "Do you want to format memory card?" and "Yes" and "No" options. Select "Yes" to format the memory card.
  • If "No" is selected, formatting is aborted and you return to the submenu.