en
it

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Thermion
Manual
Thermion

Table of contents

Color Modes

Color mode selection.

White hot is a default display mode for an observed image. The Color Modes menu item allows you to select an alternative palette:

  1. Press and hold the controller button (6) to enter the main menu.
  2. Select the Color Modes  menu item.
  3. Press the controller button (6) briefly to enter the Color Modes submenu.
  4. Rotate the controller ring (6) to select one of the palettes described below.
  5. Press the controller button (6) briefly to confirm your selection.
  • White hot – a black and white palette (the black color corresponds to cold temperature, the white color – hot temperature).
  • Black hot – a black and white palette (the white color corresponds to cold temperature, the black color – hot temperature).
  • Red hot
  • Red monochrome
  • Rainbow
  • Ultramarine
  • Violet
  • Sepia

Attention! The device does not measure the temperature of objects being observed. The image is formed based on the temperature differences of the objects.