Manuals | Pulsar

Turn on the Bluetooth module (see the Bluetooth section).
In the Bluetooth section of the menu, use the RIGHT (6) and LEFT (8) buttons to select the Scan menu item.
Confirm your selection with a short press of the M (7) button.
Press and hold any button on the Remote Control. The Remote Control is visible in the Bluetooth network and can be connected during this time.
Use the RIGHT (6) and LEFT (8) buttons to select the remote control from the dropdown list that appears.
Confirm your selection with a short press of the M (7) button.

Notes:

Once paired, the Remote Control can operate the Pulsar device.
Going forward, the Remote Control will automatically connect to the paired device when within visible range.
The name of the remote control and its battery charge level will appear in the list of paired devices at the bottom of the display in the Bluetooth section of the menu.

Manual

Forward FN455