The Pulsar 5x30 Monocular (#71011) included in the package can be attached to the Core FXQ35/55 thermal module and used as a 5x power thermal imaging scope. Along with this, the Pulsar 5x30 is a fully-functional daylight observation device.
Core allows to turn the majority of day scopes with lens diameters from 40 mm to 56 mm into a thermal device. Quick-release bayonet mount allows remove it from the scope in seconds. To install the Core onto the front optical bell of a daylight scope, specially designed Cover Ring Adapters (bought separately) with a set of reducing rings are used (the rings can be used as necessary depending on the diameter of the optical bell). The adapter is permanently attached to the optical bell of a daylight scope. This allows the Core to be quickly installed in front of the lens for nighttime use. When the Core is not used, the adapter accommodates a protective cap that covers the lens of a scope in the daytime.
IPX7 waterproof-rated protection ensures the Core Front Attachment performs perfectly in wet weather, even during intense rain, snowfall and submersion in 1 m. of water for up to 30 min. (IEC 60529).
The Core FXQ includes a universal power adapter. Operation time can be significantly prolonged by using high-capacity external power supply units, which can be attached via a weather-resistant micro-USB port and DC 2.1 x 5.5 mm.
The Core features three operating modes: City (enhanced contrast), Forest (low contrast) and Identification (improved rendering of heat signature details). Each mode optimizes imaging based on viewing conditions.
The Core offers three calibration modes: Silent Manual (“M”), Automatic (“A”) and Semi-Automatic (“H”). “A” mode implies calibration without user participation (process initiation, actuation of the shutter takes place automatically). In “H” mode, the user determines if calibration is required based on image quality. If calibration is needed, the operator uses the “Cal” button. In “M” mode, manual calibration is accomplished by pressing the “Cal” button when the lens cap is closed. “M” mode is recommended for hunting due to silent operation.
An ergonomic, wireless remote control puts basic Core controls at your fingertips for comfortable, convenient, hands-off operation.
With a frost-resistant AMOLED display, the Core Thermal Imaging Scope is designed to deliver flawless performance at an extreme temperature range of -25° - +50°C.
External battery packs EPS3 and EPS5 are designed for the use with digital units, NV riflescopes and thermal imaging scopes. The battery packs features larger capacity as compared with AA type batteries and rechargeable batteries. The use of Battery Packs significantly – up to 5 times - increases self-contained operation of high-power digital NV devices.
The Pulsar PB8I Power Bank is designed to extend operating time of Pulsar devices equipped with a microUSB port.
DN Cover Ring Adapters are special mounting units, that enable installation of Core FXQ attachments in front of the objectives of day optic devices (riflescopes, spotting scopes and binoculars). Adapters are supplied with a set of insert rings (the choice of the insert ring is defined by the outer diameter of the objectives housing of optic device). After installation the adapter stays constantly on the objective of optic device which allows installing the thermal or digital attachment in front of the objective swiftly. During the day when the attachment is not used, adapter serves as the mount for the protective cover (included in the package), which protects the optics of day riflescope.
Leave us feedback to know what you think!