en
es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Forward FN455S
Manual
Forward FN455S

Table of contents

USB Connection

  1. Power on the device by pressing the ON/OFF (9) button (the computer will not detect the device if it is turned off).
  2. Connect one end of the USB cable to the device’s microUSB connector (14) and the other end to the port on your computer.
  3. The device is detected automatically by the computer and no installation of drivers is required.
  4. Two connection modes will appear on the display: Power and Memory card.
  5. Select the connection mode with the RIGHT (6) and LEFT (8) buttons.
  6. A short press of the M (7) button confirms the selection.

Power

  • When this mode is selected, the computer is used by the device as an external power supply. An icon  will appear in the status bar.
  • The device will continue to function and all functions are available.
  • The battery pack installed in the device will not be charged.

Memory card

  • When this mode is selected, the device will be recognised by the computer as a flash card.
  • This option is designed for working with files that are stored in the device’s memory; the device’s functions are not accessible and the device turns itself off. The device continues to function after disconnection from the computer.
  • If a video was being recorded at the time of connection, the recording will cease and will be saved.

Disabling the USB

  • When disconnecting the USB from the device in Power mode, the device will continue to function with the Battery Pack, if it is available and has sufficient charge.
  • When the USB is disconnected from the device connected in Memory card mode, the device remains switched on.