en
es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Thermion 2 Pro
Manual
Thermion 2 Pro

Table of contents

Remote Control Activation

  1. Turn on the Bluetooth module (see the Bluetooth section).
  2. In the Bluetooth section of the menu, rotate the controller ring (6) to select the Find accessory or device  menu item.
  3. Confirm your selection with a short press of the controller ring (6) button.
  4. Press and hold any button on the Remote Control. The Remote Control is visible in the Bluetooth network and can be connected during this time.
  5. Rotate the controller ring (6) to select the remote control from the dropdown list that appears.
  6. Confirm your selection with a short press of the controller ring (6) button.

Notes:

  • Once paired, the Remote Control can operate the Pulsar device.
  • Going forward, the Remote Control will automatically connect to the paired device when within visible range. ​
  • The name of the remote control and its battery charge level will appear in the list of paired devices at the bottom of the display in the Bluetooth  section of the menu.