en
es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Thermion
Manual
Thermion

Table of contents

Restore Default Pixel Map

Return all defective pixels previously disabled by the user to their original state:

  1. Press and hold the controller button (6) to enter the main menu.
  2. Rotate the controller ring (6) to select the Defective Pixel Repair  menu item.
  3. Press the controller button (6) to open the submenu.
  4. Rotate the controller ring (6) to select the Restore Default Pixel Map menu item
  5. Press the controller button (6).
  6. Select “Yes” if you want to return to the factory pixel map and “No” if you do not.
  7. Press the controller button (6) briefly to confirm the selection.

Attention! One or two pixels on the display of the riflescope in the form of bright white, black or colored (blue, red or green) dots may appear. These points cannot be removed and not a defect.