en
es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Digisight Ultra LRF
Manual
Digisight Ultra LRF

Table of contents

Powering on and Image Settings

 

  1. Open the lens cover (9).
  2. Press the ON/OFF (18) button to turn on the riflescope. In a few seconds an image will appear on the display.
  3. To turn off the display while operating the riflescope, press and hold down the ON/OFF (18) button longer than one second.
  4. Turned off display will show the “Display off” message.
  5. To turn on the display, press the ON/OFF (18) button briefly.
  6. To turn off the riflescope, press and hold down the ON/OFF (18) button longer than three seconds. Display will show the “Display off” message and a countdown from 3 to 1 sec, and will turn off upon countdown expiration.
  7. Rotate the dioptre adjustment ring (1) to see a crisp image of the aiming reticle and the status bar icons. Once this adjustment is done, there is no need to rotate the dioptre adjustment ring for distance or any other conditions.
  8. Rotate the lens focus knob (8) to see a crisp image of the object observed.
  9. Adjusting the brightness and contrast of the display, enabling smooth digital zoom is described in the Quick Menu Functions section.
  10. After use, turn off the riflescope by long pressing the ON/OFF (18) button.