en
es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Proton FXQ
Manual
Proton FXQ

Table of contents

Calibration Mode

Calibration mode selection

There are three calibration modes: Manual, Semi-Automatic and Automatic.

  1. Press and hold the controller button (8) to enter the main menu.
  2. Rotate the controller ring (8) to select the Calibration Mode  icon.
  3. Press the controller button (8) briefly to enter the submenu.
  4. Rotate the controller ring (8) to select one of the calibration modes described below.
  5. Press the controller button (8) briefly to confirm the selection.

Automatic (A). In this mode the firmware determines the need for calibration. The calibration process starts automatically.

Semi-Automatic (SA). The user determines the need for calibration based on the image quality and can action at a convenient time depending on the object being observed.

Manual (M). In the Manual (silent) calibration mode the user determines the need for calibration (as in SA mode) but the lens cover must be closed during calibration.