en
es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Thermion 2 LRF XP50 Pro
Manual
Thermion 2 LRF XP50 Pro

Table of contents
Add New Distance

Add New Distance

To zero your riflescope, you need to set a zeroing distance first in the range of 1 to 910 m (955 yards).

  1. Press and hold the controller button (6) to enter the main menu.
  2. Rotate the controller ring (6) to select the Reticle & Zeroing menu item.
  3. Press the controller button (6) briefly to enter the Reticle & Zeroing submenu.
  4. Rotate the controller ring (6) to select Add New Distance  menu item.
  5. Press the controller button (6) briefly to enter the submenu.
  6. Rotate the controller ring (6) to select a value for each digit. Press the controller button (6) briefly to switch between digits 
  7. Having set the desired distance, press and hold the controller button (6) to save it.

The distance you set first becomes a primary distance – shown with icon  on the right to the distance value.

Note: Maximum number of zeroing distances is 10 for each profile.