en
es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Thermion Duo
Manual
Thermion Duo

Table of contents

Status Bar

The status bar at the bottom of the display shows current operating statuses via icons, including:

1. Colour Mode (shown only in thermal imaging mode and Multispectral PiP):

- White hot

- Black hot

2. Actual zeroing profile (e.g., A)

3. Zeroing distance (e.g., 100 m)

4. Image mode:

Digital mode

Thermal imaging mode

  Multispectral PiP Digital

Multispectral PiP Thermal

 Multispectral PiP Digital disabled

Multispectral PiP Thermal disabled

The image channel can be disabled in the “Viewing Channel Activation” sub-item of the General Settings section.

5. Amplification level (e.g., Normal; displayed only in thermal imaging mode and Multispectral PiP)

6. Smoothing Filter (displayed when the function is on; displayed only in thermal imaging mode and Multispectral PiP)

7. Calibration mode (a countdown timer will appear instead of the calibration icon when in automatic calibration mode with 5 seconds remaining until automatic calibration; displayed only in thermal imaging mode and Multispectral PiP)

8. Microphone

9. Current magnification

10. Wi-Fi connection

11. Bluetooth:

- Bluetooth is on

- the device with Bluetooth is connected

12. Auto Shutdown function (e.g., 5 min.)

13. Clock

14. Power supply:

  • Battery discharge level  (when riflescope is powered by a built-in or removable battery).
  • External battery power indicator (if the riflescope is powered by an external power supply).
  • Battery indicator with current percentage of charge (when charging from an external power source).
  • Battery indicator shows a low battery charge
  • Battery indicator shows a low internal battery charge