The Axion F thermal imager comes with an APS 3 rechargeable Lithium-ion battery. Before first use, make sure the battery is fully charged.
The icon in the status bar will flash when the battery is low. The battery needs to be charged.
Note: The PB8I Power Bank may be used as a charger.
(13) LED Indicator** |
Battery charge status |
Battery charge from 0 to 10%. Charger not connected to the mains power supply |
|
Battery charge from 0 to 10%. Charger connected to the mains power supply |
|
Battery defective. Do not use the battery! |
|
Battery charge from 10 to 20% |
|
Battery charge from 20 to 60% |
|
Battery charge from 60 to 95% |
|
Battery completely charged. Charging will automatically stop. The battery can be disconnected from the charger. |
* Available separately
**The indicator displays the current level of charge of the battery for 30 seconds when the APS charger is not plugged in. When the power is connected, the display shows the current status of the battery constantly, the LEDs additionally flickering to indicate the battery charging process.