en
es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Axion F
Manual
Axion F

Table of contents
Wi-Fi Settings

Wi-Fi Settings

This item enables you to set up your device for operation in a Wi-Fi network.

  1. Press and hold down the MENU (3) button to enter the main menu.
  2. Select the Wi-Fi Settings menu option with the UP (4)/DOWN (2) buttons.
  3. Press briefly the MENU (3) button to enter submenu.
  4. Select the desired menu item with the UP (4)/DOWN (2) buttons.

Password Setup

This menu option allows you to set a password to access your thermal imager from an external device.

The password is used to connect an external device (i.e. smartphone) to your thermal imager.

  1. Enter the Password Setup  submenu with a short press of the MENU (3) button.
  2. The unique password only for your device will appear on the image.
  3. Set the desired password with the UP (4)/DOWN (2) buttons. Switch between digits with a short press of the MENU (3) button.
  4. Save the password and exit the submenu with a long press of the MENU (3) button.

Access Level Setup

This option allows you to configure the appropriate access level to your device made available to the Stream Vision 2 application.

  • Owner level. A Stream Vision 2 user has full access to all device functions.
  • Guest level. A Stream Vision 2 user only has access to the real time video stream from the device.
  1. Press briefly the MENU (3) button to enter the Access Level Setup  submenu.
  2. Select the access level with the UP (4)/DOWN (2) buttons.
  3. Press and hold the MENU (3) to confirm your selection and exit from the submenu.

Wi-Fi Band

This setting helps to solve smartphone connection issues in the following cases:

  • If your smartphone does not support 5 GHz Wi-Fi band, switch to 2.4 GHz.
  • Many Wi-Fi networks cause interference. In this case, switching between Wi-Fi bands can improve the connection between the device and the smartphone.
  1. Press briefly the MENU (3) button to enter the Wi-Fi Band  submenu.
  2. Press the UP (4)/DOWN (2) buttons to select the Wi-Fi bandwidth – 5 GHz or 2.4 GHz.
  3. Confirm your selection with a short press of the controller MENU (3) button.