en
es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Telos LRF
Manual
Telos LRF

Table of contents

Video Recording and Photography

Telos LRF thermal imagers are capable of video recording and photography. Videos and images are saved on the built-in memory card.

Before using this feature please set the date and time (see General Settings section).

For information on how to watch recorded photos and videos, see the Stream Vision 2 user manual: Android, iOS.

The built-in recorder operates in two modes Video and Photo.


Video mode. Video recording

1. Switch to Video mode by pressing and holding the UP/REC (10) button.

2. The icon and the remaining recording time in HH:MM (Hours:Minutes) format are displayed in the upper left corner, for example 4:20.

3. Press the UP/REC (10) button briefly to start video recording.

4. When the video recording starts, the icon  will disappear and the REC icon and timer in MM:SS (Minutes:Seconds) format will appear .

5. Pause and resume recording video with a short press of the UP/REC (10) button.

6. Stop recording video with a long press of the UP/REC (10) button.

7. Video files are saved to the built-in memory card after the video recording has been stopped.

8. Press and hold the UP/REC (10) button to switch between the Video and Photo modes (Video-> Photo-> Video…)


Photo Mode. Capturing an image

1. Switch to the Photo mode by pressing and holding the UP/REC (10) button.

2. Press the UP/REC (10) button briefly to take a photo. The icon  flashes – the photo file is being saved to the built-in SD card.


Notes:

  • You can enter and operate the menu during video recording.
  • Recorded videos and photos are saved to the internal memory card in the format img_xxx.jpg (photos), video_xxx.mp4 (videos).
  • Videos are recorded in clips with a maximum duration of 5 minutes. The number of recorded files is limited by the capacity of unit’s internal memory and video compression ratio.
  • Regularly check the free capacity of the internal memory and move recorded footage to other storage media to free up space on the internal memory card.
  • In case of a memory card error, you can use the format function in the General Settings section of the main menu.

  • When the Display Off function is activated, video recording continues to run in the background.