Quick Menu

The basic settings (adjusting brightness and contrast, using the Stadiametric Rangefinder function) can be changed using the quick access menu.

• Enter the menu by briefly pressing the MENU (4).
• A short press of the МENU (4) button enables you to toggle between functions, as described below.

Brightness  – press the UP (5)/DOWN (3) buttons to change display brightness from 0 to 20.

Contrast  – press the UP (5)/DOWN (3) buttons to change image contrast from 0 to 20.

Stadiometric Rangefinder  - change the position of special marker lines to determine the distance to the object being observed by pressing the UP (5)/DOWN (3) buttons (for more details see the Stadiametric Rangefinder section).

Smooth Digital Zoom  – press the UP (5)/DOWN (3) button to change the value of the digital zoom from 2 to 8. The digital zoom changes in 0.1 increments.

Note: the magnification value is reset to the base value when the device is switched off.

• Press and hold the MENU (4) button to exit the menu or wait for 10 seconds to exit automatically.