1. Go to the "Calculator" tab.
2. Select the desired Pulsar device in the field , or leave the field blank if you have another device.
3. Select one of your profiles in the field .
4. Adjust the parameters of weather conditions, distance and angle of fire.
5. The vertical correction will be displayed in the Drop field.
6. The horizontal correction will be displayed in the Drift field.
Aim Offset Symbols |
|
U |
Up |
D |
Down |
R |
Right |
L |
Left |
7. By clicking on the fields "Drop", "Drift" or "Click value", you can select the appropriate units for corrections.
8. Tap "Reticle" to enlarge the window with the recommended aiming point.
9. Tap "Table" to calculate the amount of correction for different distances.
The resulting table can be saved in the application by tapping the button .
To share the table, tap the button and select the desired application.