en
lt

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Digex C50
Manual
Digex C50

Table of contents

Installing the IR Illuminator on the Weaver Rail

To install an IR illuminator with a Weaver mount*, you will need to install a 30 mm ring with Weaver rail** on the riflescope:

  1. Unscrew the screws (28) with the Allen key.
  2. Install the ring (29) on the riflescope body.
  3. Adjust the position of the Weaver rail (left/top/right) depending on the seat of the IR illuminator.
  4. Tighten the screws (28).
  5. Install the IR illuminator on the Weaver rail according to the installation instructions.

* Purchased separately.

** Supplied with models without an IR illuminator.