KRYPTON FXG50

Please make sure you have made the following adjustments:

• First, adjust the diopter adjustment on the eyepiece to clearly see the icons on the display and in the status bar.
• Second, adjust the lens focus to see the object of observation clearly. Please note that re-focusing may be required as the distance to the object changes.
• Do the image calibration – either in manual mode (with lens cover closed) or in automatic mode.
• Select the most suitable observation mode – “Forest”, “Rocks” or “Identification” depending on the specific observation conditions.
• Go through the different color palletes.
• Manually adjust display contrast and brightness. We recommend keeping those two values at similar levels. A huge difference between them badly affects the image quality.
• Try turning Image Detail Boost ON and OFF. The greatest benefit of this feature can be enjoyed in scenery with high contrast and at shorter distances.

In the course of the calibration process the image freezes on the screen – this is normal and not a defect.

Default calibration mode is “Automatic” (the software decides when calibration is necessary) but

you can change it to “Manual” mode in the "Main menu" => "Calibration mode" to calibrate the riflescope 

when you need to based on actual image quality. Please close the lens cover prior to manual calibration. We recommend using automatic mode all the time.

Please read more about calibration in the user manual for your thermal device.

You are using the manual calibration mode without closing the lens cover.

Please make sure the lens cover is closed during calibration or switch to the automatic calibration mode if you do not want to close the cover.

No, a clicking sound is normal in the automatic and semiautomatic calibration modes.

You may switch to the manual calibration mode to avoid the sound. Remember to close the lens cover to make sure no ghost images appear on the display.

Calibration levels the background temperature of the microbolometer and eliminates image flaws

(such as vertical stripes, ghost images of previous objects etc.). Intervals between calibrations depend

on operating time: the longer a thermal imager operates nonstop, the less frequently calibration is required.

Please note that a certain amount of non-functional pixels (max 0.5% of total quantity) is allowed by the sensor and is not considered a defect. You may try repairing the pixels using the respective menu item of your thermal imager. For details, please refer to the user manual. 

Click here to view sample video instructions.

Activate the pixel repair option in the device`s menu. You will be redirected to a window with picture in picture (PiP) mode and an auxiliary cross.

Operate with navigation buttons to move the cross into the bad pixel’s coordinates. Dead pixels disappear when the auxiliary crosss is in the correct position.

Press the ON/OFF button and check for the “OK” message on the display.

No, there is no need to zero Krypton, you only need to zero your day sight.

Please make sure you install the attachment according to the user manual.

No, there are no zeroing profiles because Krypton does not need zeroing. 

You only need to zero your day sight and make sure you install the attachment according to the instructions.

Yes, please use the PSP-V adapter to mount the Krypton in front of optical riflescope lenses on hunting and sporting weapons

with Weaver/Picatinny rails, including those based on MSR (modern sporting rifles) / AR‒15 platforms.

Please read more:

https://www.pulsar-nv.com/glo/products/33/accessories/psp-v-adapers/

Yes, it does support a wireless remote control. For details please refer to the link below:

https://www.pulsar-nv.com/glo/products/33/accessories/pulsar-rcc-wireless-remote-control/

Please make sure your device has the latest firmware update.

Yes, Krypton can be used as a handheld monocular.

You will need the 5x30B monocular for this purpose. The item is bought separately.  

Yes, it's possible. Please refer to the video for more details. 

No, Krypton is not outfitted with a tripod mount.

Possible cause

The gun is equipped with a compensator or silencer that radiates heat when fired.

Solution

It is recommended to raise the height of the riflescope to a level at which the flare is not visible.

After that, you will need to re-zero the riflescope.