en
lt

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Thermion 2
Manual
Thermion 2

Table of contents

Calibration Mode

Calibration mode selection.

There are three calibration modes: manual, semi-automatic and automatic. The selected calibration mode is displayed in the status bar (see Status Bar section).

  1. Press and hold the controller button (6) to enter the main menu.
  2. Rotate the controller ring (6) to select the Calibration Mode  menu item.
  3. Press the controller button (6) briefly to enter the Calibration Mode submenu.
  4. Rotate the controller ring (6) to select one of the calibration modes described below.
  5. Press the controller button (6) briefly to confirm your selection.

Automatic (A)

The software determines the need for calibration in automatic mode. The calibration process starts automatically.

A countdown timer will appear instead of the calibration icon when in automatic calibration mode with 3 seconds remaining until automatic calibration

Semi-automatic (SA)

The user independently determines the need for calibration (according to the image being observed).

Manual (M)

Manual calibration. Close the lens cover before starting calibration.