en
lt

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Thermion 2
Manual
Thermion 2

Table of contents

General Settings

  1. Press and hold the controller button (6) to enter the main menu.
  2. Rotate the controller ring (6) to select the General settings  menu item.
  3. Press the controller button (6) briefly to enter the submenu.
  4. Rotate the controller ring (6) to select the desired menu item.

This menu item allows you to configure the following settings:

Language

Language selection:

  1. Press the controller button (6) briefly to enter the Language submenu.
  2. Rotate the controller ring (6) to select one of the available interface languages: English, German, Spanish, French, Russian, Italian, Portuguese, Dutch, Danish, Norwegian, Swedish, Polish, Czech, Hungarian.
  3. Confirm your selection with a short press of the controller button (6).
  4. Press and hold the controller button (6) to save your selection and exit from the submenu.
 

Date

Date Setting:

  1. Press the controller button (6) briefly to enter the Date  submenu. The date is displayed in dd/mm/yyyy format.
  2. Rotate the controller ring (6) to select the desired year, month and date. Press the controller button (6) briefly to switch between digits.
  3. Press and hold the controller button (6) to save your selected date and exit from the submenu.

Time

Time Setting:

  1. Press the controller button (6) briefly to enter the Time  submenu.
  2. Rotate the controller ring (6) to select the time format - 24 or AM/PM.
  3. Press the controller button (6) to proceed to the hour setting.
  4. Rotate the controller ring (6) to select the hour value.
  5. Press the controller button (6) to proceed to the minute setting.
  6. Rotate the controller ring (6) to select the minutes value.
  7. Press and hold the controller button (6) to save your selected time and exit from the submenu.

Units of Measure

Units of measurement selection:

  1. Press the controller button (6) briefly to enter the Units of Measure submenu.
  2. Rotate the controller ring (6) to select the unit of measurement - meters or yards, press the controller button (6).
  3. Return to submenu will happen automatically.

Default Settings

  1. Press the controller button (6) briefly to enter the Default Settings submenu.
  2. Rotate the controller ring (6) to select “Yes” to restore default settings or “No” to cancel the action.
  3. Confirm your selection with a short press of the controller button (6).
  • If “Yes” is selected, display will show “Do you want to restore default settings?” and “Yes” and “No” options. Select “Yes” to restore default settings.
  • If “No” option is selected: the action will be aborted and you will return to the submenu.

The following settings will be returned to their defaults:

Video Recorder Mode – Video

Wi-Fi – off (default password)

Units of Measurement – metric

Observation Mode – Forest

Magnification – initial value

Side Incline – On

Calibration Mode – automatic

PiP – off

Zeroing Profile – A

Interface Language – English

Color Mode – White hot Reticle selection from the riflescope’s memory – 1

Attention! After restoring default settings, the date, time and user pixel map as well as the zeroing profiles data entered by the user are saved.

 

Format

This menu option allows you to format the device's memory card. All files will be deleted.

Formatting should be carried out in case of a memory card error.

Before formatting, make sure you transfer all footage to other media.

  1. Press the controller button (6) briefly to enter the Format  submenu.
  2. Rotate the controller ring (6) to select “Yes” to format the memory card, or “No” to return to the submenu.
  3. Confirm your selection by pressing the controller button (6).
  • If the “Yes” option has been selected, the "Do you want to format memory?" message and “Yes” and “No” options will appear on the display. Select “Yes” to format the memory card.
  • If “No” option is selected: formatting is cancelled and return to the submenu.