en

Deutschland

Italia

España

United Kingdom

United States

中国

Lietuva

Axion XQ LRF
Manual
Axion XQ LRF

Table of contents

General Settings

This menu section allows you to change the interface language, set the date, time, units of measure, and also return the device to factory default settings.

  1. Press and hold the MENU (3) button to enter the main menu.
  2. Use the UP (4) / DOWN (2) buttons to select the General Settings icon.
  3. Press the MENU (3) button briefly to enter the submenu.
  4. Choose the required menu item with UP (4) / DOWN (2) buttons.

Language

Language selection

  1. Press the MENU (3) button briefly to enter the Language menu item.
  2. Use the UP (4) / DOWN (2) buttons to select one of the available interface languages: English, German, Spanish, French, and Russian.
  3. Press the MENU (3) button briefly to confirm the selection.
  4. Press and hold the MENU (3) button to save your selection and exit from the submenu.

Date

Date setting

  1. Press the MENU (3) button briefly to enter the Date menu item.The date is displayed in dd/mm/yyyy format.
  2. Use the UP (4) / DOWN (2) buttons to select the desired year, month, and date. Press the MENU (3) button briefly to toggle between digits.
  3. Press and hold the MENU (3) button to save the date and exit the submenu.

Time

Time setting

  1. Press the MENU (3) button briefly to enter the Time  menu item.
  2. Select the time format (24-hour clock or AM / PM) by pressing the UP (4) /DOWN (2).
  3. Press the MENU (3) button to select the hours.
  4. Press the UP (4) / DOWN (2) buttons to select the hour value.
  5. Press the MENU (3) button to select the minutes.
  6. Press the UP (4) / DOWN (2) buttons to select the minute value.
  7. Press and hold the MENU (3) button to save the time and exit the submenu.

Units of Measure

Rangefinder units of measure

  1. Press the MENU (3) button briefly to enter the Units of Measure menu item.
  2. Press the UP (4) / DOWN (2) buttons to select either Meters or Yards as the unit of measure.
  3. Press the MENU (3) button briefly to confirm your selection.
  4. Exit from the submenu will happen automatically.

Default Settings

Factory reset

  1. Press the MENU (3) button briefly to enter the Default Settings  menu item.
  2. Use the UP (4) / DOWN (2) buttons to select Yes to restore default settings or No to cancel.
  3. Confirm your selection with a short press of the MENU (3)
  • If Yes is selected, display will show "Do you want to restore default settings?" and Yes and No options. Select Yes to restore the default settings.
  • Selecting the No option will cancel the reset and exit the submenu.

The following settings will be returned to their defaults before being changed by the user:

  • Observation Mode – Forest
  • Calibration Mode – Automatic
  • Language – English
  • Magnification – Standard (without digital zoom).
  • PiP – Off
  • Color Mode – White Hot.
  • Units of Measure – Meters

Attention! When restoring the factory defaults the date, time and user pixel map are saved.