de fr es




United Kingdom

United States


Thermion 2
Thermion 2

Table of contents

Technical Maintenance

The maintenance should be carried out at least twice a year and includes the following steps:

  • Wipe the exterior surfaces of metal and plastic parts off dust and dirt with a cotton cloth. To avoid damage to the paint coating, do not use chemically active substances, solvents, etc.
  • Clean the electric contacts of the battery pack and battery slots on the riflescope using a non-greasy organic solvent.
  • Check the optics of the eyepiece and the lens. If necessary, remove dust and sand from the optics (it is preferable to use a non-contact method). Cleaning of the exterior surfaces of the optics should be done with cleaners designed especially for this purpose.