Manuals | Pulsar

Show device diagram

PiP ("Picture in Picture") allows you to see a zoomed image simultaneously with the main image in a dedicated window.

Enabling / disabling the PiP function is carried out in the main menu (see section PiP Mode).
Change zoom ratio in the PiP window with a short press of the DOWN (5) button.
The zoomed image is displayed in a dedicated window, while the image in the rest of the screen is displayed at base magnification (2.5x).
When PiP is turned on, you can operate the discrete and continuous digital zoom. The magnification will take place only in the dedicated window.
When PiP is turned off, the image is shown with the optical magnification set for the PiP function.

Manual

Accolade 2 LRF Pro