Colour Modes

Colour mode selection.

White hot is the default display mode.

The Colour Modes menu item allows you to select an alternative palette:

1. Press and hold the controller button (6) to enter the main menu.
2. Select the Colour Modes  menu item.
3. Press the controller button (6) briefly to enter the Colour Modes submenu.
4. Rotate the controller ring (6) to select one of the palettes described below.
5. Press the controller button (6) briefly to confirm your selection.

Tip: to preserve brightness and contrast values when switching palettes, activate User Mode.

• White hot – a black and white palette where black = cold; white = hot
• Black hot – a black and white palette where white = cold; black = hot
• Red Hot
• Red Monochrome
• Rainbow
• Ultramarine
• Violet
• Sepia

Attention! The device should not be used to accurately measure temperature. The images generated are based on temperature contrast rather than true temperature readings.