en
it

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Axion 2
Manual
Axion 2

Table of contents
General Settings

General Settings

This menu section allows you to change the interface language, set the date, time, units of measure, return the device to factory default settings and perform memory card formatting.

  1. Press and hold the MENU (4) button to enter the main menu.
  2. Use the UP (5)/DOWN (3) buttons to select the General Settings icon.
  3. Press the MENU (4) button briefly to enter the submenu.
  4. Choose the required menu item with UP (5)/DOWN (3) buttons.

Language

Language selection

  1. Press the MENU (4) button briefly to enter the Language menu item.
  2. Use the UP (5)/DOWN (3) buttons to select one of the available interface languages: English, German, Spanish, French, Russian, Italian, Portuguese, Dutch, Danish, Norwegian, Swedish, Polish, Czech, Hungarian.
  3. Press the MENU (4) button briefly to confirm the selection.
  4. Press and hold the MENU (4) button to save your selection and exit from the submenu.
 

Date

Date setting

  1. Press the MENU (4) button briefly to enter the Date menu item. The date is displayed in dd/mm/yyyy format.
  2. Use the UP (5)/DOWN (3) buttons to select the desired year, month, and date. Press the MENU (4) button briefly to toggle between digits.
  3. Press and hold the MENU (4) button to save the date and exit the submenu.

Time

Time setting

  1. Press the MENU (4) button briefly to enter the Time  menu item.
  2. Select the time format (24-hour clock or AM / PM) by pressing the UP (5)/DOWN (3).
  3. Press the MENU (4) button to select the hours.
  4. Press the UP (5)/DOWN (3) buttons to select the hour value.
  5. Press the MENU (4) button to select the minutes.
  6. Press the UP (5)/DOWN (3) buttons to select the minute value.
  7. Press and hold the MENU (4) button to save the time and exit the submenu.

Units of Measure

Rangefinder units of measure

  1. Press the MENU (4) button briefly to enter the Units of Measure menu item.
  2. Press the UP (5)/DOWN (3) buttons to select either Meters or Yards as the unit of measure.
  3. Press the MENU (4) button briefly to confirm your selection.
  4. Exit from the submenu will happen automatically.

Video Compression

Only in XG model

When set to ON, standard video compression is applied so the video file size is reduced.

When set to OFF, minimal video compression is applied. In this case, the quality of the recorded video is better, but its size is significantly increased.

Warning! Larger video file sizes result in shorter recording times. This may lead to longer download times for video files through the Stream Vision 2 app.

Enable/disable video compression:

  1. Select the Video Compression  menu item with the UP (5)/DOWN (3) buttons.
  2. To turn on video compression, briefly press the МENU (4) button. 
  3. To turn off video compression, briefly press the МENU (4) button. 

Default Settings

Factory reset

  1. Press the MENU (4) button briefly to enter the Default Settings menu item.
  2. Use the UP (5)/DOWN (3) buttons to select Yes to restore default settings or No to cancel.
  3. Confirm your selection with a short press of the MENU (4)
  • If Yes is selected, display will show "Do you want to restore default settings?" with Yes and No dialogue options. Select Yes to restore the default settings.
  • Selecting the No option will cancel the reset and exit the submenu.

The following settings will be returned to their defaults before being changed by the user:

  • Video Recorder Mode – Video
  • Amplification Level – Normal
  • Smoothing Filter – Off
  • User Mode - Off
  • Calibration Mode – Automatic
  • Language – English
  • Microphone - Off
  • Wi-Fi – Off (unique password)
  • Magnification – Standard (without digital zoom)
  • PiP – Off
  • Colour Mode – White Hot
  • Units of Measure – Meters
  • Video Compression – Off (only in XG model)
  • Wi-Fi Band – 2.4 GHz

Attention! When restoring the factory defaults the date, time and user pixel map are saved.


Format

This function enables you to format the Flash memory card. All files will be deleted.

Formatting should be carried out in case of a memory card error.

Before formatting, make sure you transfer all footage to other media.

  1. Press the MENU (4) button briefly to enter the Format .
  2. Use the UP (5)/DOWN (3) buttons to select Yes to format the memory card or No to return to the submenu.
  3. Press the MENU (4) button briefly to confirm your selection.
  • If “Yes” is selected, display will show “Do you want to format memory?” with “Yes” and “No” dialogue options. Select Yes to format the memory card.
  • Selecting the No option will cancel the formatting and exit the submenu.