This feature is not supported on devices manufactured after August 1, 2021.
Remote control activation (bought separately)
Before operating the remote control (RC), remember to activate it as follows:
- Press and hold down the M (9) button to enter the main menu.
- Select option Remote Control with the UP (10) / DOWN (8) buttons.
- Press briefly the M (9) button to confirm.
- Display shows message "Wait" and countdown starts (30 sec), within which hold down for two seconds any RC button.
- If activation is successful, the message "Connection complete" appears .
- If error occurs the message "Connection failed" appears . Repeat the procedure.
- The RC is activated and ready for use.
- To unlink the RC, press the M (9) button, wait for the countdown to expire without pressing any RC button for 30 sec.
- All remote controls previously linked to your device are now unlinked.
- Now you can activate your RC again or activate another RC.