en
it

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Merger LRF
Manual
Merger LRF

Table of contents
Wi-Fi Settings

Wi-Fi Settings

This menu option allows you to set up your device for operation in a Wi-Fi network.

  1. Press and hold down the MENU (9) button to enter the main menu.
  2. Select the Wi-Fi Settings  menu option with the UP (7)/DOWN (8) buttons.
  3. Press briefly the MENU (9) button to enter submenu.
  4. Select the desired menu item with the UP (7)/DOWN (8) buttons.
 

Password Setup

This menu option allows you to set a password to access your binoculars from an external device.

The password is used to connect an external device (i.e. smartphone) to your thermal imager.

  1. Press briefly the MENU (9) button to enter the Password Setup submenu.
  2. The default password (12345678) will appear on the image.
  3. Use the UP (7)/DOWN (8) buttons to set the desired password using the UP button to increase and the DOWN button to decrease the values.
  4. Switch between digits with a short press of the MENU (9) button.
  5. Save the password and exit the submenu with a long press of the MENU (9) button.

Access Level Setup

This menu option allows you to set required access level of the Stream Vision 2 application to your device.

  • Access level Owner. The Stream Vision 2 user has the complete access to all device's functions.
  • Access level Guest. The Stream Vision 2 user has the access only to the real time video stream from the device.
  1. Press briefly the MENU (9) button to enter the Access Level Setup  submenu.
  2. Select the access level with the UP (7)/DOWN (8) buttons.
  3. Press and hold the MENU (9) to confirm your selection and exit from the submenu.
 

Wi-Fi Band

This setting helps to solve smartphone connection issues in the following cases:

  • If your smartphone does not support 5 GHz Wi-Fi band, switch to 2.4 GHz.
  • Many Wi-Fi networks cause interference. In this case, switching between Wi-Fi bands can improve the connection between the device and the smartphone.
  1. Press briefly the MENU (9) button to enter the Wi-Fi Band  submenu.
  2. Press the UP (7)/DOWN (8) buttons to select the WiFi bandwidth – 5 GHz or 2.4 GHz.
  3. Confirm your selection with a short press of the controller MENU (9) button.