en
it

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Telos
Manual
Telos

Table of contents
Colour Modes

Colour Modes


Colour palette selection.

White Hot is the default display mode.


To select an alternative palette, do the following:

  1. Press and hold the MENU (11) button to enter the main menu.
  2. Use the UP (10)/DOWN (12) buttons to select Colour Modes icon.
  3. Press the MENU (11) button briefly to enter the submenu.
  4. Use the UP (10)/DOWN (12) buttons to select the desired palette.
  5. Press the MENU (11) button briefly to confirm the selection.

Note: you can also switch from a selected color palette to the White hot palette with a long press of the DOWN (12) button.

Tip: to preserve brightness and contrast values when switching palettes, activate User Mode.


  • Black hot - a black and white palette where white = cold; black = hot
  • Red Hot
  • Red Monochrome
  • Rainbow
  • Ultramarine
  • Violet
  • Sepia

Attention! The device should not be used to accurately measure temperature. The images generated are based on temperature contrast rather than true temperature readings.