de fr es




United Kingdom

United States


Merger Duo
Merger Duo

Table of contents
Colour Modes

Colour Modes

Available in thermal imaging and multispectral PiP  modes

White hot is the default display mode.

To select another palette:

  1. Press and hold down the МENU (9) button to enter the main menu.
  2. Select the Color Modes  icon with the UP (7)/DOWN (8) buttons. 
  3. Press briefly the МENU (9) button to enter submenu.
  4. Select the desired palette with the UP (7)/DOWN (8) buttons.
  5. Confirm your selection with a brief press of the МENU (9) button.

Note: you can also switch from a selected color palette to the White hot palette with a long press of the DOWN (8) button.

Tip: to preserve brightness and contrast values when switching palettes, activate User Mode.

  • White hot - a black and white palette where black = cold; white = hot

  • Black hot - a black and white palette where white = cold; black = hot
  • Red Hot
  • Red Monochrome
  • Rainbow
  • Ultramarine
  • Violet
  • Sepia

Attention! The device should not be used to accurately measure temperature. The images generated are based on temperature contrast rather than true temperature readings.