de fr es




United Kingdom

United States


Merger Duo
Merger Duo

Table of contents

IR Illuminator Mount


  1. Open the rubber plug of the USB type-C connector (19) of the device.
  2. Insert the type-C plug of the IR illuminator (26) into the type-C connector (19). The tripod screw (27) should fit into the tripod socket (18).
  3. Tighten the tripod screw (27) as far as it will go.
  4. Adjust the light spot position in the field of vision of the digital channel by tilting the IR illuminator lens forcefully (25).
  5. To remove the IR illuminator, unscrew the tripod screw (27) and disconnect the IR illuminator from the type-C connector (19) of the device.

Note: the hole in the tripod screw (27) can be used to mount the device on a tripod.