en
it

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Talion
Manual
Talion

Table of contents
Wi-Fi Settings

Wi-Fi Settings

This item enables you to set up your riflescope for operation in a Wi-Fi network.

  1. Press and hold the controller MENU (3) button to enter the main menu.
  2. Rotate the controller (6) to select the Wi-Fi Settings submenu.
  3. Press the MENU (3) button briefly to enter the submenu
  4. Rotate the controller (6) to select the desired menu item.

Wi-Fi Activation

Turn on/off Wi-Fi

  1. Rotate the controller (6) to select the Wi-Fi Activation menu item.
  2. To turn Wi-Fi on, briefly press the MENU (3) button. 
  3. To turn Wi-Fi off, briefly press the MENU (3) button.

Password Setup

This item enables you to set a password to access the riflescope from an external device. The password is used to connect an external device (i.e. smartphone) to the riflescope.

  1. Press the MENU (3) button to enter the Password Setup submenu.
  2. The unique password only for your device will appear on the image.
  3. Rotate the controller (6) to set the desired password. Press the MENU (3) button to toggle through the digits.
  4. Press and hold the MENU (3) button to save the password and exit from the submenu.

Access Level Setup

This sub-function enables you to configure the appropriate level of access to your device made available to the Stream Vision 2 application.

Owner level. A Stream Vision 2 user has full access to all the device’s functions.

Guest level. A Stream Vision 2 user can only view video footage from the device in real time.

  1. Press the MENU (3) button to enter the Access Level Setup submenu.
  2. Rotate the controller (6) to select Owner or Guest.
  3. Confirm your selection with a short press of the MENU (3) button.

Wi-Fi Band

This setting helps to solve a smartphone connection issue in the following cases:

  • If your smartphone does not support 5 GHz Wi-Fi band, switch to 2.4 GHz band.
  • Many Wi-Fi networks may cause interference. In this case, switching between Wi-Fi bands can improve the connection between the device and smartphone.
  1. Press the MENU (3) button to enter the Wi-Fi Band  submenu.
  2. Rotate the controller (6) to select the Wi-Fi bandwidth – 5 GHz or 2.4 GHz.
  3. Confirm your selection with a short press of the MENU (3) button.