en
it

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Digisight Ultra LRF
Manual
Digisight Ultra LRF

Table of contents

External Power Supply

 

The device can be powered with an external power supply such as Power Bank (5 V).

  1. Connect the external power supply to the USB port (3) of the device.
  2. The device switches to operation from external power supply, and the IPS 7A Battery Pack will begin slowly charging.
  3. The display will show the battery icon with charge level as a percentage.
  4. If the device operates on external power supply but the IPS 7A battery is not connected, icon is shown.
  5. When the external power supply is disconnected, the device switches to the internal battery pack without powering off.

Attention! Charging IPS 7A batteries at air temperatures below 0 °C can result in reduced battery life. When using external power, connect Power Bank to the switched-on device, which have worked for several minutes.