en
it

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Trail 2 LRF
Manual
Trail 2 LRF

Table of contents

Reticle Setup

This main menu option allows you to select reticle shape, color and brightness.

  1. Press and hold the М (4) button to enter the main menu.
  2. Press UP (3)/DOWN (5) buttons to select the Reticle Setup  menu item.
  3. Press the М (4) button briefly to enter the Reticle Setup submenu.

Zeroing Profile

This main menu option allows you to select one of ten profiles. Each profile includes the following:

  • A set of zeroed distances;
  • Reticle color
  • Reticle type
  • Ballistic profile on/off

Various profiles can be used when employing the riflescope on different rifles and when shooting different cartridges.

Zeroing profiles cannot be deleted. You can change the parameters of zeroing distances or delete distances within a profile.

  1. Enter submenu Zeroing Profile with a short press of M (4) button.
  2. Select one of the zeroing profiles (shown with letters A; B; C; D; E, F, G, H, I, J) with UP (3)/DOWN (5) buttons.
  3. Confirm your selection with a short press of M (4) button.

Name of the selected profile is displayed in the status bar.

Reticle Type

Selection of reticle shapes.

  1. Press UP (3)/DOWN (5) buttons to select the Reticle Type menu item.
  2. Enter submenu Reticle Type with a short press of M (4) button.
  3. Select the desired reticle shape with UP (3)/DOWN (5) buttons. Reticle type changes as the cursor goes down the reticle list.
  4. Confirm your selection with a short press of M (4) button.

Note: the riflescope supports scalable reticles

Reticle Color

Selection of reticle color.

  1. Press UP (3)/DOWN (5) buttons to select Reticle Color  menu item.
  2. Enter submenu Reticle Color with a short press of M (4) button.
  3. Select the desired reticle color with UP (3)/DOWN (5) buttons.
  4. Confirm your selection with a short press of M (4) button.

Reticle Brightness

Reticle brightness setup.

  1. Press UP (3)/DOWN (5) buttons to select Reticle Brightness  menu item.
  2. Enter submenu Reticle Brightness with a short press of M (4) button.
  3. Set desired reticle brightness from 0 to 10 with UP (3)/DOWN (5) buttons.
  4. Confirm your selection with a short press of M (4) button.