en
it

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Trail 2 LRF
Manual
Trail 2 LRF

Table of contents

Calibration Mode

Select calibration mode.

There are three calibration modes: manual (M), semi-automatic (SA) and automatic (A).

  1. Enter the main menu with a long press of М (4) button.
  2. Press UP (3)/DOWN (5) buttons to select Calibration Mode menu item.
  3. Enter Calibration Mode submenu with a short press of M (4) button.
  4. Select one of the below calibration modes with UP (3)/DOWN (5) buttons.
  5. Confirm selection with a short press of M (4) button.

Automatic (A)

In the automatic mode the need for calibration is based on software algorithm. Calibration starts automatically.

In the automatic calibration mode, three seconds before automatic calibration a countdown timer is shown in place of the calibration mode icon.

Semi-automatic (SA)

The user determines for himself the need for calibration based on the actual image status.

Manual (M)

Manual (silent) calibration. Close lens cover before calibration.