Observation and Image Modes

The device has two image modes: colour and black and white.

Toggle between modes:

1. Turn the aperture adjustment ring (12) to select the observation mode (Day -  , Night - ).
2. Select the image mode (color/black-and-white) by short pressing the ON/OFF (3) button.

Optimal combinations of modes:

At dusk, turn the aperture adjustment ring (12) to position . You will be able to use colour mode. When the light lowers, switch to black and white.

At night, you can also use an IR-illuminator (included in the package or purchased separately).

Note: In low light conditions, noise may appear in the image. This is normal and not a defect.